MT20-RT series

-Special machine for aerospace engine casing processing
-Duo block structure design
-XYZ axis driven by high-speed ball screw
-Axis rapid traverse could be 20m/min
-The integrated structure of the beam and the column forms an arch structure, which enhances the overall rigidity of the machine and the stability during processing.

Configuration Specification

XYZ axes are drove by precious ball screw
XYZ axes are drove by precious ball screw which is low-noise, space-efficient and light design, high acceleration and deceleration, high-accuracy, high repeatability. The Rapid federate of 3 axes is up to 20m/min, and the acceleration is up to 0.3G ~ 0.6G.

One piece casting made column bridge: enforce the machine rigidity and stability while machining.

Base: Inverted dual V-shaped rib structure applied in basement design to achieve best force flow path. The whole travel of X-axis is supported, and this is to avoid gravitational dropping and deformed into guarantee workpiece and surface machining accuracy.

Duo block structure with best aspect ratio.

Specification	Unit	MT20-RT
X-axis	mm	-1,000 ~ 1,800
Y-axis	mm	-1,000 ~ 1,000
Z-axis	mm	850
Distance from spindle end to table	mm	-300 ~ 550 (Vertical) 60 ~ 910(Horizontal)
Table Length× Width	mm	1,250 x 1,250
Maximum turning	mm	Ø1,900
C-axis angle	deg	± 360(continuously)
C-axis speed	rpm	5
C-axis torque(S1/max)	Nm	8,500 / 29,000
Rapid traverse	m /min	X/Y=20
Spindle taper	deg	HSK100A
Spindle speed	rpm	8,000
Spindle power(S1/S6)	kW	50 / 62.5
Spindle torque(S1/S6)	Nm	318 / 398
Tool shank	pcs	40T
Max. tool length	mm	400
Max. tool diameter with adjacent tool	mm	Ø125
Max. tool diameter without an adjacent tool	mm	Ø250

*Please contact our sales if you have a special requirement.
*All specifications and designs are subject to change without notice.

Back